![]() You need the section titled "Manual method". Download and install the LibrePilot GCS that works on your version of PC, then go here to install the firmware onto the CC3D. If you don't have a way to flash the bootloader with your current setup then go here for instructions to flash the hex bootloader you got from the previous link:Īfter that you have a bootloader flashed. ![]() If the setup you have running can flash hex files then go here to get a hex bootloader to install with your current setup: You have to use external usb to serial adapter. CC3D is supported but not through main usb. If that doesn't work then here are other ways. CLEANFLIGHT Tested with F1, F3, F4 and F7 flight controllers. You can either search for that section or refresh the page (click in web address and press enter works best) if it doesn't take you to the correct section: You need the section titled "Bootloader + firmware update example". Go here and try this first because it is easier. It is possible that you have a (possibly old) bootloader already installed. You need bootloader first, then firmware.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
June 2023
Categories |